做爱影片

2001.6-现在 做爱影片

1999.4-2001.5 做爱影片 工程力学系博士后流动站

神经电刺激系统的力学性能分析，复合材料结构设计及稳定性分析，高速冲击下材料力学行为研究

参与完成自然科学基金面上项目三项，主持完成国家重大专项-大飞机项目项目。主要从事复合材料高应变率下损伤及断裂行为研究，复合材料连接结构研究和复合材料结构设计、植入式医疗器械的结构设计优化等工作。

近五年发表主要论著：

[1] Dang Zhangchi,Yan Li, Gan Xuedong, Ge, Dongyun, Prediction on the fatigue behavior of Ti-6Al-4V components treated by split sleeve cold expansion with different final reaming depth,EUROPEAN JOURNAL OF MECHANICS A-SOLID, Volume 111(2025):105578

[2] Du Xuzhen ,Ge Dongyun, Dang, Zhangchi, Wang, Xiangming, Rapid aerodynamic estimation of annular wings based on multiple linear regression, AEROSPACE SCIENCE AND TECHNOLOGY, Volume 158(2024)：109887

[3] Dang Zhangchi，Peng Yehao, Yang Rongjuan ,Yan Li, Gan, Xuedong, Ge Dongyun. Experimental study on the effect of reaming on the fatigue life of split-sleeve cold-expanded Ti-6Al-4V alloy components,INTERNATIONAL JOURNAL OF FATIGUE, Volume 188(2024): 108521

[4] 杨荣娟; 葛东云; 赵轩，刘传宝. 高功率激光修复稀土镁合金铸件的组织和力学性能, 金属热处理(J) Vol.44(10),P1-5,2019

[5] Liu, Yu; Chen, Jiansheng; Hu, Chunhua; Ma, Yu; Ge, Dongyun; etc. Vision-Based Method for Automatic Quantification of Parkinsonian Bradykinesia, IEEE RANSACTIONS ON NEURAL SYSTEMS AND REHABILITATION ENGINEERING. Vol.27（10), P1952-1961, 2019(10)

[6] Yang, Rongjuan; Ge, Dongyun; Zhao, Xuan. MICROSTRUCTURE ANALYSIS OF RARE EARTH-MAGNESIUM ALLOY REPAIRED USING HIGH POWER SURFACE LASER CLADDING. IRF2018: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON INTEGRITY-RELIABILITY-FAILURE,P369-370, 2018

[7] He Boling; Ge Dongyun. Dynamic analysis of single-lap, adhesively bonded composite-titanium joints subjected to solid projectile impact . JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY Vol.32 （11),P1176-1199,2018.

[8] He, Boling; Ge, Dongyun. Dynamic strength of adhesively bonded composite joints with similar and dissimilar assembled adherends JOURNAL OF REINFORCED PLASTICS AND COMPOSITES Vol. 36（23), P1683-1692, 2017(12)

[9] He, Boling; Ge, Dongyun. Coupled continuum damage mechanics and failure envelope method for failure prediction of composite multi-bolt joints. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES. Vol.36（8), P563 -578, 2017(4）.

[10] Ge, Dongyun; Mo, Yuming; He, Boling; Wu, Yiting; Du, Duzhen, Experimental and numerical investigation of stiffened composite curved panel under shear and in-plane bending. COMPOSITE STRUCTURES Vol.137, P185-195, 2016(3)

[11] Mo, Yuming,Ge, Dongyun,He, Boling. Experiment and optimization of the hat-stringer-stiffened composite panels under axial compression. COMPOSITES PART B-ENGINEERING. Vol 84,P285- 293,2016(1)

[12] 何柏灵,葛东云,杜旭朕,莫与明.基于连续损伤力学的复合材料单剪螺栓连接强度估算策略[J].复合材料学报,2016,33(12):2918-2930.

[13] 吴以婷,葛东云,李辰.湿热环境下Carbon/Epoxy复合材料层合板动态压缩性能[J].复合材料学报,2016,33(02):259-264.

[14] 何柏灵,葛东云,莫与明,杜旭朕.T800碳纤维增强复合材料双剪单钉连接的拉伸试验及强度估算[J].复合材料学报,2016,33(07):1540-1552.

[15] 葛东云,莫与明,何柏灵,杜旭朕.复合材料帽型加筋板轴压试验及承载能力预测[J].复合材料学报,2016,33(07):1531-1539.

[16] Li, Dian-sen,Chen, Hao-ran,Ge, Dong-yun,Jiang, Nan,Jiang, Lei. Split Hopkinson pressure bar testing of 3D multi-axial warp knitted carbon/epoxy composites. COMPOSITES PART B-ENGINEERING, Vol 79, P 692-705. 2015(9)

[17] Mo, Yuming,Ge, Dongyun,Zhou, Jiangfan. Experiment and analysis of hat-stringer-stiffened composite curved panels under axial compression. COMPOSITE STRUCTURES .Vol 123, P150-160. 2015（5）